Omni wheels for mobile robots and AGVs

Aluminium hub, rubber rollers and a bearing bore of 6, 8 or 10 mm. Three sizes are in series production: 100, 127 and 152 mm, rated 35 to 50 kg per wheel.

Omni wheel with an aluminium hub and two rows of black rubber rollers, labelled: diameter 127 mm, wheel width 39.5 mm, bore diameter 6, 8 or 10 mm
The 127 mm wheel: 22 rubber rollers on an aluminium hub.
Smaller omni wheel of the same design, labelled: wheel diameter 100 mm, wheel width 39.5 mm, bore diameter 6, 8 or 10 mm
The 100 mm wheel: 18 rubber rollers on an aluminium hub.
Sizes and specifications
SizeDiameter × widthRollersBearing boreRated load per wheelWeightStatus
3 inch83 × 39.5 mm146 / 8 / 10 mm30 kg0.27 kgOn request
4 inch100 × 39.5 mm186 / 8 / 10 mm35 kg0.40 kgIn series production
5 inch127 × 39.5 mm226 / 8 / 10 mm45 kg0.56 kgIn series production
6 inch152 × 39.5 mm286 / 8 / 10 mm50 kg0.78 kgIn series production

Hub: aluminium. Rollers: rubber. Sold under our DK brand. Load ratings are our own figures per wheel.

Choosing a size

An omni wheel rolls forward like a normal wheel and slides sideways on its small rollers, so a base with three or four of them can move in any direction without steering.

Choose the size by the load each wheel carries and the floor it runs on. Larger wheels cross gaps and thresholds more easily; smaller ones keep the base low and light.

Divide the total weight of the robot, including payload, by the number of wheels, and leave a margin below the rated load.

Bores and adaptors

The standard bearing bores are 6, 8 and 10 mm. If your motor shaft needs a different bore, a keyway or a flange adaptor, send the shaft drawing with your request and we will quote it as a turned part.

Our own design

The wheels are designed and made in our plant.

Questions about the wheels

What is the difference between an omni wheel and a mecanum wheel?

An omni wheel has rollers at 90 degrees to the wheel axis and is usually mounted three or four to a base, at angles to each other. A mecanum wheel has rollers at 45 degrees and is mounted four to a base like normal wheels. Both let a robot move sideways; the choice depends on the chassis layout.

Do you publish prices?

No. The price depends on size, bore and quantity. Send the quantity you need and we will quote.

Can I buy a few wheels for testing?

Tell us how many you need for testing and we will confirm what we can supply.

Are the wheels your own product?

Yes. They are designed and made in our plant and sold under our DK brand.

Need wheels for a mobile base?

Tell us the size, the bore and the quantity. We reply with a quote and delivery time.

Request a quote