How we inspect and document turned parts

What we measure in our own plant, what a partner lab measures, which documents ship with an order, and which certificates we do and do not hold.

Documents you can order

  • Outgoing inspection report

    Sampled parts measured against the drawing dimensions, with the instrument used for each one. Our sample report covers five parts and twelve dimensions.

  • Mill certificate

    The steel mill’s inspection certificate for the bar, with heat number, chemistry and mechanical values, to EN 10204 type 3.1 where the mill issues it.

  • Substance test report

    Third-party laboratory tests for lead, cadmium, mercury and hexavalent chromium on the material of your part.

  • Coordinate measuring report

    Measured on a partner’s coordinate measuring machine when a drawing calls for geometric tolerances that our own instruments cannot verify.

Measuring equipment in our plant
InstrumentMakeQtyRange
Video measuring machineEasson (Taiwan)2250 × 150 mm
MicrometerMitutoyo (Japan)40–25 mm
CaliperMitutoyo (Japan)50–200 mm
Dial test indicatorMitutoyo (Japan)20–0.25 mm
Pin gaugesChengliang (China)1 set0–20 mm
Thread gaugesChengliang (China)1 set1–8 mm

Inspection through the order

  1. Incoming bar

    Grade and size are checked against the mill certificate.

  2. Setup

    The first parts are measured before the run continues.

  3. During the run

    Operators check the critical dimensions at set intervals.

  4. Before shipping

    Sampled parts are measured and recorded in the outgoing inspection report.

Certificates

  • ISO 9001:2015Quality management certificate held by our sales company, valid to 30 June 2029.
  • What we do not holdSector-specific quality certificates. We hold ISO 9001 only; if your programme requires more, we are not yet the right supplier.

Materials and restricted substances

We buy bar from fixed sources and keep the mill certificate with the batch.

Free-cutting brass contains lead. That is normal for the alloy, and it matters for RoHS and REACH. Tell us at quote stage which rules your product must meet, and we will propose a material and provide the test report for it.

We do not make blanket compliance statements. Compliance is confirmed per material and per part.

Questions about quality

Can you provide a first-article inspection report?

Sample parts are delivered with a measurement report. Tell us the format you need, for example every drawing dimension numbered on a ballooned drawing.

Do you have a coordinate measuring machine?

Our own plant measures with video measuring machines, micrometers and gauges. Coordinate measuring reports are made on a partner’s machine.

Are your parts RoHS compliant?

It depends on the material and the plating. We confirm per part and supply a laboratory report. Leaded free-cutting brass needs particular attention.

Need specific documents with your parts?

List them in the request. We confirm what we can provide before we quote.

Request a quote